Bambu Lab P1S and P1P USB Plug by KiCkiN MakerWorld

P1s Usb Port. Connect AMS to P1 series Bambu Lab Wiki FYI Bambu now sells LED's that make use of the USB port Regardless thanks for your help in solving this mistery.

It's when you replace the anemic stock lighting bar with a 3rd party light kit that you can run into problems-- the port for the stock light is officially rated at 0.3A To this end, I installed a string of simple LED lights powered by the internal USB port, and you can judge the difference below for yourselves: Before (official Bambu P1S light only): Screenshot 2023-12-15 at 14.50.39 1719×1112 189 KB

Bambu Lab P1S and P1P USB Plug by KiCkiN MakerWorld

It's when you replace the anemic stock lighting bar with a 3rd party light kit that you can run into problems-- the port for the stock light is officially rated at 0.3A BE AWARE…that USB-A socket supports a very low current throughput. Like another poster said, remove the top cover get some decent lighting and just pull that foam pad out of the way

Bambulab P1P/P1S USB LED with ON/OFF SWITCH by nyx_nk MakerWorld. BE AWARE…that USB-A socket supports a very low current throughput. Plugged a simple charging cable into the P1S USB port and nothing

Replace the USBC cable Bambu Lab Wiki. Like another poster said, remove the top cover get some decent lighting and just pull that foam pad out of the way FYI Bambu now sells LED's that make use of the USB port